Pfad zu EX2Ultra angeben FTP

The My Cloud EX2 Ultra from Western Digital is a powerful NAS (Network Attached Storage) solution that allows users to store and access centralized data over the network. One of the most useful features of this device is FTP (File Transfer Protocol) access, which is particularly suitable for remote access or automated file transfers.

If you are trying to access your EX2 Ultra via FTP, it is important to know how to specify the correct path, how to configure access, and what requirements must be met.

🔧 Requirements for FTP access

Before you can use the path, you must ensure that the FTP service is enabled on your EX2 Ultra:

Log in to the dashboard:

Open your browser and go to [IP address of the NAS]

Log in with your administrator credentials.

Enable FTP:

Navigate to Settings > Network > FTP Access.

Activate the "FTP Service" switch.

Save the changes.

Configure shared folders:

Go to Shares and select the folder you want to make accessible via FTP.

Make sure FTP access is enabled for this folder.

Give the user accounts appropriate read or write permissions.

🌐 Specify the FTP path correctly

The path to access depends on whether you are accessing it from the local network or from outside.

🏠 Local access (within your home network):

FTP-Address:

🌍 External access (via the Internet):

You need to set up port forwarding (port 21) on your router.

Use public IP address or DDNS.

⚠️ Note: For security reasons, we recommend using FTPS or VPN, as FTP is unencrypted.

💻 Access via FTP client (e.g. FileZilla)

Open FileZilla or another FTP client.

Enter the following data:

Host: IP address or domain (e.g. 192.168.1.100)

Username: Your NAS user

Password: Your password

Port: 21

Connect. You should now be able to access the shared directories.

✅ Tips for successful access

Make sure the user has FTP permissions to the destination folder.

Use passive FTP if the connection fails.

Check firewall and router settings if access is not possible.

Use static IP addresses or dynamic DNS to have a fixed address.

📌 Conclusion

To access the WD My Cloud EX2 Ultra via FTP, you must first enable FTP in the dashboard, configure shares correctly, and use the correct path. For local access, the IP address is sufficient; for external access, you'll need additional router configuration. Tools like FileZilla make access particularly convenient.

If you'd like, I can also provide you with step-by-step instructions with screenshots or a script for automation—just let me know!